Micro:bit V2 Mainboard

• Official Go bundle of micro:bit V2
• Comes with extra accessories: microB USB Cable, two-cell AAA battery holder and two AAA batteries
• 32-bit ARM Cortex-M4 CPU
• Main microcontroller: Nordic Semiconductor nRF52833
• Clock Speed: 64MHz
• Memory size: 512KB Flash
• RAM size: 128KB RAM
• USB Interface: NXP KL27Z with 32KB RAM
• 5x5 LED Matrix Display (Red LEDs)
• Two Programmable Buttons
• Touch Sensitive micro:bit logo
• Additional Power Indicator LED and Mic input indicator LED
• Built-in MEMS microphone input
• Onboard Accelerometer, Compass, Light and Temperature Sensors
• Wireless Communication, via Bluetooth 5.1 and BLE and 2.4GHz Radio
• Edge Connectors:
  • Total 25 pins: 20 smaller pitch to pitch pins, 5 RINGS Notched Edge pins
  • 4 Dedicated GPIO, PWM, I2C, SPI, Power and etc.
  • 5 Ring pins for connecting crocodile clips or banana plugs
• 20-pin Edge Connectors, 5 notched edge Connectors
• Dedicated I2C bus for peripherals
• Power Button to power off the MCU
• Micro USB Type-B Connector
• JST-PH Battery Connector (Not JST-XH)
• Reset Button with Status LED
• Available current for external devices: 200mA
• Programming Platform: C++, Makecode, Python, Scratch
• Size: 5cm (w) x 4cm (h)
• Official Go bundle of micro:bit V2
• Official Go bundle of micro:bit V2
• Official Go bundle of micro:bit V2
• Official Go bundle of micro:bit V2
• Official Go bundle of micro:bit V2
• Official Go bundle of micro:bit V2

Zoom:bit Robot Car Kit (w/o Micro:bit)

• 1x REKA:BIT expansion board
• 1x USB power and data cable
• 1x 9+1 lessons quick start guide book
• 1x Zoom track
• 1x Maker Line sensor
• 1x Ultrasonic sensor
• 2x 10mm LED module
• 2x DC motor with wheel
• 1x Micro servo motor
• 4x Grove to female header cable
• 1x 4xAA battery holder with DC plug
• 4x AA battery
• 1x Castor
• 1x Mini screwdriver
• 1x Mini screwdriver
• Rivets
• Double-sided tapes

Micro:bit Silicon Case (w/o Micro:bit)

• Designed for micro:bit V1.x and V2:
• micro:bit V2 (single board)
• micro:bit V2 Go bundle
• micro:bit V2 Club (10 x Go bundle)
• Available in three good-looking colors: Orange / Yellow / Blue
• The precise hole allows users to use all functions of the micro:bit board.
• Environmentally friendly materials, excellent workmanship.
• Material: Silicone
• Dimension: 56.5 x 10.2 x 37mm

Micro:bit Silicon Case (w/o Micro:bit)

• Designed for micro:bit V1.x and V2:
• micro:bit V2 (single board)
• micro:bit V2 Go bundle
• micro:bit V2 Club (10 x Go bundle)
• Available in three good-looking colors: Orange / Yellow / Blue
• The precise hole allows users to use all functions of the micro:bit board.
• Environmentally friendly materials, excellent workmanship.
• Material: Silicone
• Dimension: 56.5 x 10.2 x 37mm

Micro:bit Game Handle (w/o Micro:bit)

• Gamepad breakout board designed for micro:bit.
• Works with both the micro:bit V1 and micro:bit V2
• Small size, suitable for children.
• Onboard some electronic modules, which can be used as a game console or a remote controller.
• Support graphical programming.
• It can be combined with the Lego Technic building blocks to change the shape by DIY.
• Size: 107mm*77mm
• Power supply: 2 x AAA battery (included)