Micro:bit V2 Mainboard

Features

• 32-bit ARM Cortex-M4 CPU
• Main microcontroller: Nordic Semiconductor nRF52833
• Clock Speed: 64MHz
• Memory size: 512KB Flash
• RAM size: 128KB RAM
• USB Interface: NXP KL27Z with 32KB RAM
• 5x5 LED Matrix Display (Red LEDs)
• Two Programmable Buttons
• Touch Sensitive micro:bit logo
• Additional Power Indicator LED and Mic input indicator LED
• Built-in MEMS microphone input
• Onboard Accelerometer, Compass, Light and Temperature Sensors
• Wireless Communication, via Bluetooth 5.1 and BLE and 2.4GHz Radio
• Edge Connectors:
  • Total 25 pins: 20 smaller pitch to pitch pins, 5 RINGS Notched Edge pins
  • 4 Dedicated GPIO, PWM, I2C, SPI, Power and etc.
  • 5 Ring pins for connecting crocodile clips or banana plugs
• 20-pin Edge Connectors, 5 notched edge Connectors
• Dedicated I2C bus for peripherals
• Power Button to power off the MCU
• Micro USB Type-B Connector
• JST-PH Battery Connector (Not JST-XH)
• Reset Button with Status LED
• Available current for external devices: 200mA
• Programming Platform: C++, Makecode, Python, Scratch
• Size: 5cm (w) x 4cm (h)

Zoom:bit Robot Car Kit (w/o Micro:bit)

Packing List

• 1x REKA:BIT expansion board
• 1x USB power and data cable
• 1x 9+1 lessons quick start guide book
• 1x Zoom track
• 1x Maker Line sensor
• 1x Ultrasonic sensor
• 2x 10mm LED module
• 2x DC motor with wheel
• 1x Micro servo motor
• 4x Grove to female header cable
• 1x 4xAA battery holder with DC plug
• 4x AA battery
• 1x Castor
• 1x Mini screwdriver
• 1x Mini screwdriver
• Rivets
• Double-sided tapes

REKA:BIT RBT Project Kits (w/o Micro:bit)

Features

• Controller
• Power Supply
• Input(Sensors)
• Output(Motors & LEDs)
• Maker Soil Moisture Sensor
• Neopixel RGB LED Stick

Packing List

• 1x REKA:BIT expansion board
• 1x USB power and data cable
• 1x 5 projects + 7 components quick start guide book (English Version)
• 1x Maker Soil Moisture Sensor
• 1x RBG LED Stick
• 1x Ultrasonic sensor
• 2x 10mm LED module
• 2x DC motor with wheel
• 1x Micro servo motor
• 1x Submersible Water Pump
• 4x Grove to female header cable
• 1x 4xAA battery holder with DC plug
• 4x AA battery
• 1x Castor
• 1x Mini screwdriver
• Double-sided tapes

6 In 1 Ring:Bit Bricks Pack without micro:bit

Features

• The Ring:bit expansion board is a simple PCB for the micro:bit.
  • Extends the micro:bit’s 3 GPIO ports.
  • Convert the P0/P1/P2 port to the common GVS port.
  • Loaded with 3 pieces AAA batteries to drive the car or other accessories. (batteries are NOT included)
• Six Fun Cases In One Kit: kids can build 6 shapes, including traffic lights, bricks car, temperature-controlled fans, smart desk lamps, wipers, and trebuchets.
  • Trebuchet: While button A being pressed, the trebuchet executes the launch order and will return to its original launch status automatically.
  • Bricks Car: While pressing button A+B, the car moves at the full speed; button A for turning to the right side at the full speed; button B for turning to the left side at its full speed; the screen faces downside for moving back at the full speed; and shake the car for stopping.
  • Wipers: When button A being pressed, the wiper begins working; while buton B being pressed, the wiper stops working.
  • Temperature-controlled Fans: When the value is over 28 degrees, the fan turns; while less than 26 degrees, the fan stops turning.
  • Traffic Lights: When power on, the red LED lights on for 3 seconds, then the yellow led in 1 second and the green one in 3 seconds at last.
  • Smart Desk Lamp: It lights on automatically while the surrounding light is low and lights off when the returned value is higher than your set point.
• Well-designed Assembly Instructions and Courses: it makes the kids learn the coding easily as well as how to build blocks in an interesting way.
• Almost 200 Pieces Bricks: In fact, children can use these rich building blocks to build more favorite shapes

Packing List

• 1 x Ring:bit expansion board V2
• 2 x 360 degrees servos
• 1 x Rainbow LED Strip
• 2 x Wheels
• 200 x Bricks
• 1 x Screwdriver

Micro:bit Silicon Case (w/o Micro:bit)

• Designed for micro:bit V1.x and V2:
• micro:bit V2 (single board)
• micro:bit V2 Go bundle
• micro:bit V2 Club (10 x Go bundle)
• Available in three good-looking colors: Orange / Yellow / Blue
• The precise hole allows users to use all functions of the micro:bit board.
• Environmentally friendly materials, excellent workmanship.
• Material: Silicone
• Dimension: 56.5 x 10.2 x 37mm

Micro:bit Silicon Case (w/o Micro:bit)

• Designed for micro:bit V1.x and V2:
• micro:bit V2 (single board)
• micro:bit V2 Go bundle
• micro:bit V2 Club (10 x Go bundle)
• Available in three good-looking colors: Orange / Yellow / Blue
• The precise hole allows users to use all functions of the micro:bit board.
• Environmentally friendly materials, excellent workmanship.
• Material: Silicone
• Dimension: 56.5 x 10.2 x 37mm

Smart Coding Kit (without Micro:bit)

Features

• A DIY (Do It Yourself) Watch kit
• Designed for micro:bit
• Works with both the micro:bit V1 and micro:bit V2
• Comes with a sample code (in the guide)
• Power with Coin Cell battery (CR2025 or CR2016)
• Comes with Strap
• Easy to assembly

Packing List

• 1 x CR2025 Battery Holders
• 1 x Nylon watch strap
• 1 x micro USB wire
• 1 x MINI Screwdriver

Micro:bit Game Handle (w/o Micro:bit)

Features

• Gamepad breakout board designed for micro:bit.
• Works with both the micro:bit V1 and micro:bit V2
• Small size, suitable for children.
• Onboard some electronic modules, which can be used as a game console or a remote controller.
• Support graphical programming.
• It can be combined with the Lego Technic building blocks to change the shape by DIY.
• Size: 107mm*77mm
• Power supply: 2 x AAA battery (included)

Packing List

• 1 x micro:bit remote control board.
• 1 x Double-sided tape, for mounting Battery holder
• 1 x (2xAAA) Battery holder terminated with JST socket
• 2 x AAA battery

EDU:BIT Training & Project Kit for micro:bit (without micro:bit)

Features

• Start having fun with EDU:BIT right out of the box. Start coding right away and see your board lights up and plays melody with the press of a button. No wiring required when used as a training kit.
• It can even support up to 3 servo motors and 2 DC motors to actuate any creative projects you will build
• Each feature and its associated micro:bit IO pin is clearly labeled on the board for easy reference
• Indicator LEDs are built in on EDU:BIT to ease troubleshooting for both digital and analog IO pins.
• Plug-and-play cables are provided for you to connect the broken off Bits to the main board.

Packing List

• 1x Piezo buzzer with audio jack
• 1x Sound sensor
• 1x Potentiometer
• 1x IR sensor
• 4x Programmable RGB LEDs
• 3x Big LEDs (traffic light module - red, yellow green)
• 2x Push buttons
• 3x ports for servo motors
• 2x ports for DC motors
• 1x port for I2C Interface (3.3V)
• Dimension: 157.50 mm x 124.50 mm x 19.00 mm

Tiny:bit smart robot car for micro:bit (without micro:bit)

Features

• Simple design with small size, based on micro:bit controller
• Makecode graphical programming.
• "Interactive" Robotic car.
• Alligator clip at the end
• Intelligent obstacle avoidance, following, playing music, tracking, interesting lighting and APP supporting
• Compatible with building block.

Packing List

• 1 x Car chassis
• 2 x Motor
• 2 x Motor bracket
• 1 x Universal wheel
• 2 x Wheel
• 1 x Remote control
• 1 x Lithium battery
• 1 x Set of plastic rivet
• 1 x Line tracking map
• 1 x Micro USB cable

DIY Wooden Music Box

Features

• Suitable for age 6 years old and above
• Come with everything needed to assemble the music box
• No power or battery needed
• Learn the mechanism of a wind-up music box
• Music: Carrying You (From "Castle in the Sky" by Studio Ghibli)

DIY Wooden Robot Trolley

Features

• Interactive Learning: Teaches basic physics principles through a fun and engaging activity.
• High-Quality Craftsmanship: Made with fine workmanship, featuring smooth and safe edges for a child-friendly experience.
• Durable Wooden Design: Sturdy construction ensures lasting use while promoting an eco-friendly approach to play.
• Easy to Assemble: Simple DIY assembly makes it great for kids to build and understand the mechanics of the pulling car.
• Captivating Design: The robot feature attracts kids’ attention, making learning more exciting.

DIY Wooden Laser Target Kit

Features

• Build it yourself to learn electronics, laser basics, mechanics, and problem-solving skills.
• Laser training is safer than live ammunition and ideal for home practice.
• The target shows hit positions instantly to help improve accuracy.
• Alligator clip at the end
• The kit includes all required tools and parts, with no extra purchases needed.
• DIY kits are affordable and offer a cost-effective solution.

Packing List

• Material: Wood, electronic modules
• Laser target model size: 15*11*9.5cm
• Pistol model size: 12*9.5*1.7cm
• Weight: 186g
• Power supply method: AA battery (not included in the product)

DIY Wooden Ferris Wheel

Features

• Suitable for age 6 years old and above
• Come with everything needed to assemble the Ferris wheel project
• AA batteries included.
• Learn the basic concept and the structure of a Ferris wheel

Packing List

• Wooden parts for the Ferris wheel structure
• Some double-sided tape
• Some wires
• 4 x AA batteries
• 1 x AA battery holder
• 1 x Wooden filer (For sanding)
• 1 x DC motor
• 1 x Switch
• 1 x Wood glue

DIY Wooden Elevator

Features

• Suitable for age 6 years old and above
• Come with everything needed to assemble the elevator project
• AA batteries included.
• Learn the basic concept and the structure of a elevator

Packing List

• Wooden parts for the elevator structure
• Some orange stopper
• 1 x Wired controller
• 4 x AA batteries
• 1 x AA battery holder
• 1 x Wooden filer (For sanding)
• 1 x DC motor
• 1 x Orange gear
• 1 x String
• 1 x Cylinder gear
• 1 x Metal rod

DIY Wooden Battery Powered House STEM Kit

Features

• Suitable for age 4 years old and above
• LED is powered up with 2 AA batteries
• AA batteries included.
• Come with everything needed to assemble as a working mini turbine

Packing List

• 1 x AA Battery Holder
• 1 x Wooden House Structure
• 1 x Small DC Motor with plastic enclosure
• 1 x Wire connector
• 1 x Small screwdriver
• 1 x Blinking LED
• 1 x Bracket for Door
• 4 x AA batteries
• 1 x Switch
• Some screws and nuts for mounting
• Some double-sided tape

DIY Bionic Worm Crawling Robot

Features

• Suitable for age 4 years old and above
• Mimic Worm Crawling
• AA batteries included.
• Moveable or crawlable
• Learn the basic structure of the simple robot

Packing List

• Wooden parts for the robot body structure
• 4 x Plastic wheels (black and white)
• 1 x Small DC Motor
• 2 x Plastic wheels for small DC motor
• 1 x 2xAA size battery holder with wires (Black and Red)
• 2 x Rubber Band
• Some Iron rods
• Some bolts and nuts, plus some self-tapping screws
• 1 x Small Screwdriver
• 4 x AA battery

DIY Wooden Geared Mobile Robot STEM Kit

Features

• Suitable for age 6 years old and above
• Come with everything needed to assemble the geared vehicle
• AA batteries included.
• Learn the basic concept of gears

Packing List

• Wooden parts for the car structure
• Some orange plastic stopper
• Some double-sided tape
• Some screws
• 2 x White plastic gear-shaped connector
• 1 x Metal rod
• 1 x AA battery holder
• 1 x Wooden filer (For sanding)
• 1 x DC motor
• 1 x Orange plastic stopper
• 4 x AA batteries
• 1 x Screwdriver

DIY Radio Controlled (RC) Car

Features

• Ability training: use hands and brains, cultivate interest, intellectual development, emotions, parent-child communication, interactive toys
• Simple and practical, promote interaction between relatives and friends, and intellectual development.
• Stimulate your baby's imagination and become a good partner for intelligence, enlightenment and intellectual development.

Packing List

• Wooden parts for the car structure
• Some orange plastic stopper
• Some double-sided tape
• Some screws
• 2 x White plastic gear-shaped connector
• 1 x Metal rod
• 1 x AA battery holder
• 1 x Wooden filer (For sanding)
• 1 x DC motor
• 1 x Orange plastic stopper
• 4 x AA batteries
• 1 x Screwdriver

DIY Wooden Foam Ball Launcher

Features

• Suitable for age 6 years old and above
• Come with everything needed to assemble the launcher project
• Learn about DC motor and the concept of friction on different objects and surfaces
• AA batteries included

Packing List

• Wooden parts for the launcher structure
• Some double-sided tape
• Some screws
• 2 x orange stopper
• 4 x AA batteries
• 1 x AA battery holder
• 1 x DC motor
• 1 x Metal rod
• 2 x Wheel
• 1 x Big metal bracket
• 2 x Small metal bracket
• 5 x Circular foam
• 1 x Screwdriver